Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Jacksonville?
Metal roof installation in Jacksonville, FL typically costs between $11,500 and $32,000 for an average single-family home in 2026, with most homeowners paying $16,000 to $22,000 for a standing seam steel roof on a 1,800-square-foot house. That works out to $8.50 to $16 per square foot installed, depending on the metal profile, roof complexity, and whether the old roof needs to come off first. Call Brennan Roofing Co Jacksonville at (904) 719-6346 for a written quote before any work starts.
Let’s be direct: metal roofing is a premium product with a premium price tag. It costs two to three times more than architectural asphalt shingles upfront. The tradeoff is a roof that typically lasts 40 to 70 years in Florida’s climate, versus 15 to 20 years for shingles in the same heat and salt air. If you plan to stay in your home, the math often works. If you’re selling in three years, it probably doesn’t.
What follows is a straight breakdown of what you’ll pay in the Jacksonville market, what drives the number up or down, and where homeowners leave money on the table. Travis Oakley at Brennan Roofing Co Jacksonville has put this guide together from real job numbers, not national averages that don’t reflect Duval County labor rates, wind codes, or material pricing.
For a deeper look at how we install these systems and what materials we carry, see our Metal Roof Installation in Jacksonville page. You can also return to our home page for our full service area and credentials.
Key Takeaways
- Typical cost range: $11,500 to $32,000, with $16,000 to $22,000 as the most common window for an average Jacksonville home.
- Per-square-foot pricing: $8.50 to $16.00 installed, including underlayment, fasteners, and the metal panels themselves.
- Standing seam costs more: $12 to $16 per square foot. Exposed-fastener corrugated or ribbed panels run $8.50 to $11 per square foot.
- Stone-coated steel: $14 to $21 per square foot in the Jacksonville market.
- Old roof removal adds $1.50 to $3.00 per square foot if there’s only one existing layer.
- Brennan Roofing puts the price in writing before any work begins. No door-knock surprises, no change-order creep.
Metal Roof Installation Cost Breakdown (2026)
Here is what the line items look like on a metal roof job in Jacksonville as of 2026. These numbers come from our own recent installations and reflect current material pricing from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral lines, plus Duval County labor rates.
| Line Item | Typical Cost Range (Jacksonville, FL) | Notes |
|---|---|---|
| Metal material (steel panels, standing seam, or stone-coated) | $5,200 – $11,500 | Varies by gauge, profile, and paint finish. Standing seam with Kynar coating runs higher. |
| Underlayment (synthetic or peel-and-stick high-temp) | $900 – $2,600 | Synthetic underlayment is standard on metal. High-temp peel-and-stick for valleys and eaves adds cost but seals the vulnerable points. |
| Labor (installation crew) | $3,200 – $7,800 | Metal takes longer than shingles. Standing seam requires more fastening discipline and panel alignment. |
| Fasteners, clips, and flashing system | $700 – $2,100 | Standing seam uses hidden clips. Exposed-fastener systems use gasketed screws. Flashing at penetrations, valleys, and walls is custom-fabricated on site. |
| Old roof removal and disposal | $1,100 – $2,900 | One layer of shingles is straightforward. Multiple layers or old wooden shake adds dump fees and labor. |
| Decking repair or replacement | $300 – $1,700 | Jacksonville humidity causes deck rot at the eaves. We inspect and write any needed repairs into the quote before work starts. |
| Drip edge, ridge cap, and trim | $400 – $1,000 | Painted to match the panels. Includes ridge vent material. |
| Permit fees (Duval County) | $150 – $450 | City of Jacksonville building permit for roof replacement, plus any inspection fees. |
These numbers assume a typcial single-family home between 1,300 and 2,200 square feet with a walkable roof pitch and no major structural surprises. The total above lands between $11,500 and $32,000, which matches the range we gave at the top.
What matters more than the national average is what we see on actual Jacksonville jobs. A 1,600-square-foot house in Mandarin or San Marco with a straightforward 6/12 hip roof, one layer of old shingles, and no deck damage: you’re looking at $14,500 to $19,500 for a standing seam steel system in 2026. That’s the real-world number. The same roof with an exposed-fastener panel system might come in at $12,000 to $15,500.
What Affects Metal Roof Installation Pricing in Jacksonville
No two roofs cost the same, even when the square footage matches. Here are the factors that move the number the most in the Jacksonville market.
- Metal profile and panel system. Standing seam with hidden fasteners runs $12 to $16 per square foot installed. Exposed-fastener panels (the corrugated or ribbed kind you see on sheds, shops, and some homes) run $8.50 to $11 per square foot. The difference is the fastening system and the amount of labor involved. Standing seam costs more because every panel is individually placed, clipped, and seamed; exposed-fastener goes down faster with screws through the face of the panel.
- Roof shape and cut-up factor. A simple gable roof with few penetrations is a fast install. A Jacksonville bungalow with multiple dormers, valleys, a chimney, plumbing vents, and skylights requires custom flashing at every transition. Every penetration adds labor hours. A heavily cut-up roof of the same square footage as a simple one can cost 20 to 35 percent more.
- Deck condition and plywood replacement. We find rotted decking on nearly 40 percent of tear-off jobs in neighborhoods like Murray Hill, Riverside, and Ortega, where older homes with decades of humidity exposure have softened plywood at the eaves and valleys. Replacing a few sheets runs $60 to $100 per sheet. Replacing the whole deck adds $2,000 or more.
- Underlayment choice. Florida code requires a solid underlayment under metal. Standard synthetic runs $0.35 to $0.55 per square foot. High-temperature peel-and-stick membrane, which we recommend for valleys and eaves, runs $0.90 to $1.40 per square foot. The upgrade is worth it in Jacksonville’s torrential summer storms, but it’s a real line item.
- Roof pitch and access. Anything steeper than 8/12 means the crew works slower and wears fall-protection rigging on every section. Anything flatter than 3/12 often requires a mechanically seamed panel system rather than a standard profile. Tight lots in San Marco or Avondale with limited space for staging and dumpster placement also add cost.
- Gauge and paint finish. Standard 26-gauge steel is what most standing seam systems use in the Jacksonville market. Upgrading to 24-gauge adds about $0.80 to $1.20 per square foot. A Kynar 500 or Hylar 5000 paint coating (the best available for salt air and UV exposure) adds another $0.50 to $0.90 per square foot. In Neptune Beach, Atlantic Beach, and Mayport, where salt spray from the ocean accelerates corrosion on cheaper finishes, we recommend the upgraded coating.
Metal Roof Cost Compared to Other Roofing Materials in Jacksonville
Metal is not the most expensive option, but it’s the biggest upfront investment among common residential materials. Here’s how it stacks up in the Jacksonville market in 2026 for an average 1,800-square-foot home.
- Architectural asphalt shingles: $8,500 – $14,500 total installed, or $4.50 to $7.50 per square foot. Life expectancy in Florida: 15 to 20 years.
- Standing seam metal: $16,000 – $26,000 total installed, or $12 to $16 per square foot. Life expectancy in Florida: 45 to 70 years.
- Exposed-fastener metal: $11,500 – $16,500 total installed, or $8.50 to $11 per square foot. Life expectancy: 30 to 45 years, with fastener maintenance around year 15.
- Stone-coated steel (like Boral and some CertainTeed lines): $15,000 – $28,000 total installed, or $14 to $21 per square foot. Life expectancy: 40 to 60 years.
- Concrete tile: $18,000 – $34,000 total installed. Requires reinforced framing on many Jacksonville homes that weren’t built for the weight.
- Slate: $28,000 – $50,000 plus structural reinforcement. Rarely practical in the Jacksonville market.
Over a 30-year window, metal often wins on cost. You’ll replace shingles at least once, maybe twice. You’ll pay for the metal roof once. The deciding question isn’t usually the material cost. It’s whether you’ll stay in the home long enough for the investment to pay out.
How to Save on Metal Roof Installation
We don’t compete on the lowest bid, and we won’t pretend otherwise. But we do believe in giving homeowners a clear-eyed view of where money gets wasted and where it doesn’t.
- Choose the right roof profile for the house. An exposed-fastener panel roof actually looks good and holds up fine on a Florida ranch or a workshop-style home. You don’t need standing seam on every house. The right system for your architecture saves $4 to $5 per square foot without sacrificing function.
- Replace the roof during its natural failure point, not after. Waiting until the old roof leaks into the decking means paying for sheathing replacement, insulation repair, and sometimes drywall work inside. A proactive replacement in the off-season (November through February, outside the storm rush) is cheaper and faster.
- Write your quote during a time when crews aren’t scrambling. Jacksonville roofing crews run hardest June through October. A metal roof installed in January or February often costs less because the company isn’t paying overtime or staffing up for storm response.
- Keep the existing deck when it’s sound. If the plywood underneath is in good shape, we don’t replace it. Some contractors quote full deck replacement by default. We don’t. We inspect it, we show you what’s there, and we only write replacement into the quote when it’s actually needed.
- Ask about the 365-Day Done Right Promise. A metal roof is a big job. If a fastener backs out or a panel shifts within the first year, Brennan Roofing comes back and corrects it at no charge. That’s in writing. It means you aren’t paying for follow-up work that should be covered.
The most important savings strategy: get a written quote before any work starts and compare line by line. Two contractors can bid the same roof at $18,000 and $24,000, and the difference is usually in the underlayment, the gauge, the flashing detail, or the warranty. A cheaper quote that skips the high-temp underlayment or uses lighter-gauge panels isn’t cheaper. It’s just less roof. Call Brennan Roofing Co Jacksonville at (904) 719-6346 for a free estimate you can actually read.
Jacksonville-Specific Metal Roofing Considerations
Florida is different from Georgia, and Jacksonville is different from Miami. Here’s what matters in this specific market.
Wind Codes and Hurricane Season
Jacksonville sits in a 120 to 150 mph wind zone, depending on the exact location relative to the coast. Metal roofing, when properly installed with the right clips and fastening pattern, is the strongest wind-resistant roofing material available. That’s a real advantage. But the installation must be done to code. We install every metal roof to Miami-Dade standards for the fastening system, even in Duval County, because the failure point in a hurricane is almost always the fastener pattern, not the panel itself. Flashing at eaves and rakes also has to be done with extra fasteners at closer spacing than Northern installs.
Salt Air and Corrosion
Homes within three miles of the ocean in Jacksonville Beach, Neptune Beach, Atlantic Beach, and Mayport face salt air that eats standard metal coatings faster than inland homes. We recommend a Kynar-coated panel for any house in the beach corridor. The coating costs more upfront, but it’s the difference between a roof that looks new at year 15 and one that has visible bloom and oxidation at year 8. We’ve seen cheap metal roofs from low-bid installers show rust at the cut edges within five years in Mayport.
Heat and Humidity
Jacksonville’s summer attic heat can hit 140 degrees or more on an asphalt shingle roof. Metal reflects a significant portion of the solar load and can reduce attic temperatures by 15 to 25 degrees on the hottest days, depending on the paint finish and whether there’s venting under the panel system. Lower attic heat means lower cooling bills. How much? Typically 10 to 20 percent on the cooling portion of the electricity bill in July and August for a home with proper attic ventilation. That saving isn’t enough to justify the roof on its own, but it’s real and it accumulates.
HOA and Historic District Rules
Some Jacksonville neighborhoods have rules about roofing materials. Homes in the Riverside-Avondale Historic District may require materials compatible with the historic character of the street. Some HOAs in Nocatee, Bartram Park, and Julington Creek restrict exposed-fastener panels but allow standing seam. Before you buy, check your HOA covenants and any historic overlay. We can help you sort through the requirements, but the final decision sits with the association or the planning department.
Why Some Metal Roof Quotes Are Suspiciously Cheap
In Jacksonville, a metal roof quote below $8 per square foot installed should raise questions. That price cannot cover 26-gauge steel with a decent coating, proper underlayment, a code-compliant fastening system, and labor from a crew that isn’t cutting corners. Here’s what we see on low-ball metal jobs:
- No underlayment replacement. The crew leaves the old felt or synthetic underlayment in place and lays the metal directly over it, which violates manufacturer warranty terms and Florida code.
- Thinner steel. 29-gauge steel instead of 26 or 24. It’s more prone to oil-canning (visible waviness in the panels) and hail damage.
- No flashing at transitions. The valleys, chimneys, and walls are not properly flashed. They rely on caulk and luck.
- Exposed fasteners with no gaskets or the wrong gaskets. Screws without neoprene washers leak within a few years. We’ve repaired enough of these to know the pattern.
- No tear-off. Some guys will lay metal over a failing shingle roof. This works in dry climates. In Jacksonville’s humidity, it creates a vapor trap that rots the decking underneath.
We don’t do any of those things. The price goes on paper, the scope is written out, and we don’t cut the material spec to win a bid. Travis Oakley runs every job through the same standard, and that standard doesn’t bend for a low-ball competitor.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost per square foot in Jacksonville?
Metal roofing in Jacksonville runs $8.50 to $16 per square foot installed in 2026, depending on the panel system. Exposed-fastener panels run $8.50 to $11 per square foot. Standing seam runs $12 to $16 per square foot. Stone-coated steel runs $14 to $21 per square foot. The per-square-foot price includes materials, underlayment, labor, and a standard flashing scope. Call (904) 719-6346 for a written line-item quote.
Is a metal roof worth the extra cost in Florida?
A metal roof costs two to three times more upfront than asphalt shingles, but it lasts 40 to 70 years versus 15 to 20 years for shingles in Jacksonville’s heat and humidity. Over a 30-year window, metal often costs less because you avoid one or two full shingle replacements. If you plan to stay in the house for more than 15 years, the numbers typically work. If you’re selling soon, the premium isn’t usually reflected in the sale price. We’ll help you run the math for your specific roof before we sell you anything.
Can you install a metal roof over existing shingles?
Yes, it’s technically possible, and in some cases we’ll do it, but we don’t recommend it on most Jacksonville homes. When we install over an existing shingle roof, we’re putting metal over a material that may already be trapping moisture or hiding deck rot. Tearing off the old roof first adds $1.50 to $3 per square foot, but it lets us inspect the deck, replace rotted sheets, and start clean. That’s the right way to build a roof that lasts 40 years. Call (904) 719-6346 and we’ll tell you whether your existing roof is a candidate for overlay or should come off.
How much does standing seam metal roofing cost versus corrugated panels?
Standing seam in Jacksonville runs $12 to $16 per square foot installed. Exposed-fastener corrugated or ribbed panels run $8.50 to $11 per square foot. On a 1,800-square-foot roof, that’s a difference of $6,300 to $9,000. The standing seam system costs more because of hidden clips, more precise panel installation, and more custom flashing work. The exposed-fastener system is still a legitimate metal roof; it just uses a different fastening method and needs fastener inspection and occasional tightening around year 15. We install both, and we’ll show you the difference on your actual roof.
How long does a metal roof last in Jacksonville’s climate?
A properly installed standing seam metal roof in Jacksonville lasts 45 to 70 years. An exposed-fastener system lasts 30 to 45 years. Stone-coated steel lasts 40 to 60 years. The limiting factors in this market are salt air near the coast and fastener wear over time. The paint or coating on the panels is what fails first, not the steel itself. A Kynar-coated panel near the beach corridor will hold its finish much longer than a standard polyester finish. We cover everything in our written quote, and the 365-Day Done Right Promise covers defects and failures in the first year at no charge.
Get a Written Metal Roof Quote in Jacksonville
Metal roofing is a significant investment, and you should not have to call a contractor just to get a ballpark. You should have enough information from this page to know whether a metal roof makes sense for your house and your budget. When you’re ready to move forward, Brennan Roofing Co Jacksonville will come to your home, inspect your existing roof, and put a written price in your hands before any work starts. That price includes the material spec, the underlayment, the flashing scope, and the labor. It does not move at the door.
Every job is run by background-checked, uniformed technicians who show up inside the promised window. The work is backed by the 365-Day Done Right Promise, in writing: if it’s not done right, we make it right at no charge for one full year. We install materials from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, and we’ll walk you through the differences so you can choose with confidence rather than guesswork.
Call (904) 719-6346 for a free metal roof estimate. A live person answers, around the clock. No voicemail, no callback queue. That’s the standard.
Written by Travis Oakley, Owner at Brennan Roofing Co Jacksonville, serving Jacksonville, FL. Pricing reflects the Jacksonville market as of 2026 and is based on actual completed installations in Duval County.
Pricing reflects the Jacksonville market as of 2026. Brennan Roofing Co Jacksonville offers free estimates – call (904) 719-6346.
What Our Customers Say
"Crew lead is a veteran and runs the job like it. Showed up at 7 sharp, tarped the garden, tore off the old roof, and had the new shingles on by the end of day two."
- Joe K."Neat, quiet, and disciplined crew. Magnet swept the yard after."
- Tonya R."Quality work and clear communication. Rain pushed the start by two days, which is fair, but we were hoping to be done sooner."
- Cathy N.