Boral Roofing Company Nationwide

Boral Roofing Company in Jacksonville: What to Know First

Boral roofing repair in Jacksonville typically runs $450 – $2,800 depending on whether we’re replacing a few cracked tiles, repairing underlayment, or rebuilding flashing around a penetration. We’re an independent Boral service provider, not a manufacturer-authorized shop, and most repairs take one day on site. You get a written price before any work starts, and every job carries our 365-Day Done Right Promise in writing.

Call (904) 719-6346

This page is for Jacksonville homeowners whose Boral roof is leaking, showing cracked tiles, or nearing the end of its service life and who want straight answers before calling anyone. If that’s you, call (904) 719-6346 and you’ll reach a live person, not a voicemail.

How Boral Products Fail – and How We Fix Them

Boral makes a few distinct roofing lines, and their failure patterns are not all the same. Here’s what we actually see on Jacksonville rooftops:

• Boral Concrete Tile (Standard Weight): These tiles rarely fail on their own. What fails is the underlayment beneath them, usually after 20 – 25 years of Florida sun and humidity. You’ll see water stains on the ceiling long before you see a broken tile. We lift the tile carefully, replace the underlayment in that section, and reset the tiles. No shortcuts on nail pattern, because a wind-driven rain in August will find a lazy nail.
• Boral Lightweight Tile: Lighter tile means easier handling, but it also means thinner cross-sections. We regularly find hairline cracks that start at the nail hole and spread outward, especially on tiles that were nailed too tight during the original install. The fix is replacing the individual tile before water gets to the decking. If a Jacksonville home has more than a handful of these, we’ll tell you straight whether it’s time to start budgeting for a full re-roof.
• Boral Tile Roofing with Clay (Terracotta-style): Clay tiles and foot traffic don’t mix. We see chipped corners and broken tiles from satellite installers, pest control techs, and painters who didn’t know where to step. Walking a clay tile roof wrong cracks tiles you can’t see from the ground. We use roof ladders and walk boards, and we inspect for hidden fractures in the valleys and hips every time we’re up there.
• Boral Barrel and Flat Profile Tile: The way these tiles interlock matters. If a replacement tile isn’t seated correctly, the overlap channel doesn’t shed water the way it should, and you end up with a slow leak that takes months to show up indoors. We’ve fixed jobs where the previous “repair” was a tile glued on top of a broken one instead of being properly interlocked underneath the course above it.
• Flashing and Penetration Failures on Tile Roofs: This is the most common Boral-related repair in Jacksonville, period. Skylights, plumbing vents, chimneys, and wherever a tile roof meets a wall. The lead or aluminum flashing deteriorates, or the original install used the wrong profile for a tile roof. We rebuild it with proper tile-compatible flashing and counter-flashing, because that’s where the leak actually is most of the time.

If it’s not right, we’re not done.

Our Boral Roofing Company Process

Here’s how a Boral repair or replacement goes when you call Brennan Roofing Co Jacksonville:

1. 1
   Call and talk to a person. You call (904) 719-6346. A live person answers, asks what you’re seeing, and schedules a time that works. No automated phone tree.
2. 2
   On-site inspection. A uniformed, background-checked technician walks the roof and identifies the failure. We take photos and show you exactly what we found, in plain English.
3. 3
   Written line-item price. Before any work starts, you get a written price on paper. The number does not move at the door. You decide if it makes sense.
4. 4
   The repair or replacement. On a tile job, we decide with you whether OEM Boral tile is needed or whether a quality aftermarket tile matches the profile and color at a lower cost. The choice is yours, and we explain the trade-off honestly.
5. 5
   Water test and cleanup. We test the repair before we leave. Then we clean up. No nails in the driveway, no tile chips in the flower beds.
6. 6
   Written guarantee. Every job is covered by the 365-Day Done Right Promise. If it fails within one full year, we come back and fix it at no charge.

What Boral Roofing Company Costs in Jacksonville

Here are real ranges for what we charge in Jacksonville, so you have a ballpark before anyone sets foot on your property:

• Single tile replacement: $450 – $750 per tile, depending on whether we need to match an OEM Boral tile or can use a quality aftermarket match.
• Flashing repair around one penetration: $600 – $1,400 depending on access and how much of the surrounding tile has to be lifted.
• Sectional underlayment replacement under tile: $1,800 – $4,500 for a typical roof valley or one slope of a ranch-style home.
• Full Boral tile roof replacement: $18,000 – $40,000 depending on the square footage, roof pitch, and the specific Boral line you’re replacing.

What moves the price most is whether we can match existing tile or have to source specific Boral profiles that are on backorder, and how much decking underneath needs replacement once we get the tile off. We’ll tell you the spread before you spend a dollar. Call (904) 719-6346 for a free estimate.

Why Jacksonville Homeowners Call Brennan Roofing Co Jacksonville for Boral Work

Boral tile roofs are not the place for a roofer who’s going to learn on your dime. Travis Oakley and our crew have been working roofs across Jacksonville for years, from flat membrane work near Regency Square to full tile tear-offs in Mandarin. We know what a properly seated Boral tile looks like from the ground, and we know what it looks like when somebody tried to fake it.

Every technician on your roof is background-checked and in uniform. You know exactly who’s up there. The price goes on paper before work starts, and it does not move at the door. And if you need a full replacement, we’re not locked to one manufacturer. We install Boral, GAF, Owens Corning, and CertainTeed, so we can match your budget and give you options without pushing a brand that doesn’t fit your situation.

We answer the phone around the clock with a live person. No voicemail, no callback queue. If you call, you get a human.

FAQs