Boral Gutter Replacement Nationwide

Boral Gutter Replacement: The Jacksonville Owner’s Guide

Boral gutter replacement in Jacksonville typically runs $8 to $14 per linear foot installed for standard 5-inch K-style aluminum or steel profiles, with most single-family homes landing between $1,200 and $2,800 total depending on footage, story height, and fascia condition. We stock Boral-compatible gutter components on our trucks and can usually complete a full gutter replacement on a standard ranch or two-story home in one day. Most Jacksonville homeowners discover the problem the hard way: a gutter pulling away from the fascia after a hard afternoon thunderstorm, water pouring over the edge instead of through the downspout, or a rusted section that’s been quietly leaking against the soffit for months.

Call (904) 719-6346

If you’re reading this, you’ve probably already spotted the telltale signs. Maybe the gutter is sagging in the middle, or you noticed water staining on the siding below the roofline. Either way, you want to know what it costs, whether it can be fixed, and who in Jacksonville will actually show up and do the work. That’s what this page answers.

Which Boral Models This Applies To

Boral’s gutter and trim lines are most commonly paired with their concrete and steel roofing products, particularly the Boral Steel roof panels and their tile profiles that are popular in Jacksonville’s coastal and historic districts. The gutter profiles themselves are typically standard 5-inch or 6-inch K-style configurations in steel, aluminum, or copper-look finishes designed to match Boral’s roofing color palette. What matters more than the model name is the profile depth and the hanger type: Boral’s recommended installations use hidden hangers spaced at 24 inches on center, which is a tighter spec than the 32- to 36-inch spacing you’ll see on builder-grade gutters. That tighter spacing matters in Jacksonville, where a summer downpour can dump two inches of rain in an hour and a full gutter weighs hundreds of pounds.

To identify what you have, look for a stamped label inside the gutter end cap or on the original invoice from your roofer. If you don’t have either, measure the width across the top opening: 5-inch gutters are the Jacksonville standard for residential, while 6-inch gutters are common on Boral tile roofs because the tile overhang delivers more water per linear foot. We’re an independent Jacksonville roofing contractor, not a Boral dealer, which means we can source OEM-spec Boral gutters when you want a factory match, or recommend an equivalent 24-gauge steel or .027-gauge aluminum aftermarket profile that matches the original dimensions and color. The honest difference is lead time and cost: OEM Boral components can take two to three weeks to arrive, while aftermarket equivalents in the same gauge and profile are typically on our truck the same week.

Signs Your Boral Gutter Replacement Is Failing

• Water spilling over the front lip during normal rain. This usually means the gutter is pitched wrong, the downspout is clogged, or the hangers have pulled loose from the fascia. If it happens in multiple spots along the same run, the gutter has lost its slope and needs to be rehung or replaced.
• Sagging or visible gaps between the gutter and fascia board. In Jacksonville’s humidity, fascia boards rot behind the gutter, and the screws that hold the hangers lose their bite. Once the fascia softens, the gutter pulls away, and no amount of caulk will fix it. The repair requires replacing the rotted fascia section and rehanging the gutter on solid wood.
• Rust streaks, pinholes, or actual water dripping from the bottom of the gutter. Steel gutters near the coast deal with salt air on top of the normal Florida rain. Once pinholes start, patching buys you months, not years. The metal is compromised, and the only real fix is replacing the affected run.
• Downspouts separating at the elbows or pulling away from the wall. This is often a sign that the downspout was undersized for the roof area, or that debris backed up and the weight of standing water pulled the joints apart. Boral’s spec calls for 2×3-inch downspouts minimum, and larger on tile roofs.
• Staining or paint bubbling on the fascia, soffit, or siding directly below the gutter line. Water is getting behind the gutter or overflowing against the house. Left alone in Jacksonville’s climate, this turns into wood rot and mold inside the wall cavity, which is a much more expensive repair than the gutter itself.

Replacement Cost & What’s Included

Here’s what we quote for Boral-compatible gutter replacement in Jacksonville, with the price on paper before any work starts:

• 5-inch seamless aluminum, standard residential: $8 to $11 per linear foot installed
• 6-inch aluminum (larger roofs, Boral tile profiles): $10 to $14 per linear foot installed
• 24-gauge steel gutters, factory-finished: $12 to $16 per linear foot installed
• Downspouts (2×3-inch or 3×4-inch): $8 to $12 per linear foot installed
• Rotted fascia board replacement (per 8-foot section): $12 to $18 per linear foot, including new primed wood or PVC board
• Gutter guard installation (optional): $5 to $9 per linear foot installed

Every quote includes removal and haul-away of the old gutters, new hangers spaced to manufacturer spec, new downspouts and elbows, sealant at all joints, and a final water test. The price goes on paper before we touch the roof, and it does not move at the door. That’s The Garrison Standard, and that’s how Brennan Roofing Co Jacksonville has operated since we opened. All gutter replacement work is covered by our 365-Day Done Right Promise: if it’s not right, we come back and make it right, in writing, at no charge for a full year.

What drives the price up in Jacksonville? Second-story work on tile roofs, fascia that’s rotted from years of clogged gutters, and long runs that need a second downspout added to handle the volume. What drives it down? A single-story ranch with clean fascia and standard 5-inch runs.

DIY or Call Us?

Gutter replacement isn’t the most dangerous job on a house, but it’s not a weekend project for most people either. What you can safely do: clean out the gutters yourself twice a year, check that downspouts are still connected after storms, and watch for water behavior during a normal rain. That tells you where the problem is. What you shouldn’t do: attempt to rehang a sagging gutter on a second story from a ladder, or try to patch rusted steel when the fascia behind it is already soft. Ladder work near the roofline accounts for a significant share of homeowner injuries every year, and in Jacksonville’s heat, you’re also dealing with metal that’s too hot to touch for half the afternoon. Travis Oakley has been running crews across Jacksonville for years, from flat membrane work near Regency Square to full tear-offs in Mandarin, and the pattern is consistent: homeowners who try to save money on gutter work usually end up paying more to fix the water damage behind the wall. If you’re not comfortable on a ladder with tools in both hands, call us at (904) 719-6346. We’ll inspect the full run, tell you what actually needs replacing and what doesn’t, and hand you a written price before any work starts. If it’s not right, we’re not done.

FAQs